Produtos

Diamond’s compact, rugged, cable-free enclosures simplify the development of reliable and rugged systems incorporating Diamond’s Athena III, Helios and Rhodeus SBCs plus stackable I/O expansion modules into fixed or mobile applications. Supported SBC form-factors include PC/104, EPIC and EBX.

Janus-MM-LP Dual or Quad CAN Module
PC/104 & PC/104-Plus

The Janus-MM-4LP-XT family of I/O modules offers two or four opto-isolated CANbus 2.0B ports plus 16 digital I/O lines. Models are available in both the PC/104-Plus and PC/104 form factors. An FGPA core houses the CAN controller logic and digital I/O logic providing data rates up to 1Mbps. Each CAN port supports standard and extended frames as well as expanded TX and RX message queues for enhanced performance. Each port has its own combination isolator and transceiver chip.

Janus-MM-4LP-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs. It was designed with harsh applications in mind including latching connectors to further improve reliability. Extended temperature operation of -40°C to +85°C is tested and guaranteed. The module is compatible with MIL-STD-202G shock and vibration specifications.

DS-MPE-CAN2L CANbus Module
PCIe MiniCard

The DS-MPE-CAN2L is a rugged, low cost dual port CAN 2.0 PCIe MiniCard module that is ideal for CAN expansion in embedded and OEM applications.

The module implements a CAN protocol bus controller that performs serial communications according to the CAN 2.0A and CAN 2.0B specifications. The protocol uses a multi-master bus configuration for the transfer of frames between nodes of the network and manages error handling with no burden on the host processor. Error analysis features enabling diagnostics, system maintenance, and system optimization. A listen-only mode enables CAN bus traffic analysis and automatic bit-rate detection.

Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.

The DS-MPE-CAN2L product comes with the PCIe MiniCard hardware assembly, a cable kit with two CAN cables, and a hardware kit containing jumpers and mounting screws.